Instant Electric Water Heater

Specification:
1. The Instant Electric Water Heater can be installed over/under the sink vertically or invertly.
2. Dry heating and overheat protection, the Instant Electric Water Heater can bear high water pressure.
3. The Instant Electric Water Heater is suitable for washing dish, vegetable and hands.

Our Instant Electric Water Heaters have passed the International Quality System ISO9001 and they are in accordance with:IEC 60335-1:2004(Ed4.1) & IEC60335-2-35:2002,and other related standards.
We adopt advanced technology to produce our Instant Electric Water Heaters and they have the advantages such as super high heating efficiency, high water pressure, safety and durability etc. Back heating design, allow to connect with water valve or water tap directly to the outlet. Our products are suitable for the location need hot water such as household, hotel, saloon, office, school and hospital. Ultra thin body, international fashionable design and beautiful appearance will make you go into the modern life.
Please contact the local dealer or our after-sales service department directly once there is any problem in the process of installation and operation. Our company will improve and innovate the products design and quality in future. If there is any change, it will not be informed.

safety note:
Read the instruction manual carefully before instruction!
1.The spray head must be descaled regularly Do not switch on if there is a possibility that the water in the heater is frozen.
2.The outlet must not be connected to any tap or fitting other than those specified.
3.This appliance can be use by children aged from 8 years and above and persons with reduced physical sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance. Cleaning and user maintenance shall not be made by children without supervision.
4.If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.

Features and functions of the Instant Electric Water Heater
1.Instant hot water, high heating efficiency, bears high water pressure.
2.Multiple safety protections for dry heating, overheating
3.Pure resistance load, no inductance, no electromagnetic radiation., environmental protection with no pollution.
4.Energy saving, start heating while the water in, it is hardly lose any energy and the heating efficiency is up to 96%.
5.Adopt advanced water pressure induction flow switch, no water no heating, bear dry heating.
6.Optional power levels, can meet your seasons requirements, save electricity and economical for life.
7.Easily to use, no need to reserve water, pre-heating, keep warm or wait.
8.Suitable for where need hot water such as household, hotel, saloon, office, school and hospital .
9.Startup with very low water pressure.

Safety Note:
1.The water heater must connect with earthing secured; it’s forbidden dismantling the earthing device.
2. It is forbidden to install and use the Instant Electric Water Heater invertedly .
3. The rated current of the power switch can not be less than the rated current of the water heater.
4. The Instant Electric Water Heater must be filled with water before power on when use for the first time or discontinued for a long time.
5. If the water in the device may be freezing, do not power on before confirm that the ice in the water heater has been thawy.
6. Shut off the power and turn off the inlet valve when you don't use the water heater.
7. If the power cord is damaged, it must be changed by the manufacturer or maintenance department or the professional person .
8. Shut off the power when the water heater is blocked and clean the inlet filter and outlet shower.
9. The outlet should not be connected to any faucet or connector which is not recommended.
10. When the water temperature is 15 ℃, the water resistivity should be not less than 1300 Ω * cm.
11.The outlet of the water heater should be connected with an inlet hose according with IEC61770.
12. It is recommended that the water heater should be embedded in the wall or installed with a protective frame which can be closed fit with the cover of the heater at the bonding position between the heater and the wall.

Application methods:
The Instant Electric Water Heater can be use when the installation check is ok, it must be filled with water before power on when use for the first time or discontinued for a long time.
If the water in the device may be freezing, do not power on before confirm that the ice in the Instant Electric Water Heater has been thawy.
1. Close the external power supply switch, the power indicator light on.
2. Switch on the inlet valve of the tap water, water flow out from the outlet.
3. Users can control the water flow through the regulating valve to reach the temperature you expect.
4. Switch off the water valve when you are using the device, the water heater will stop working and heating.

Safety protection function
1.When the outlet temperature exceed 75℃, the Instant Electric Water Heater will stop heating. If dry heating happened, the protection device will switch off the power supply automatically.
2.Over-pressure protection: If the pressure of inlet is too high, the inlet safety reducing valve start to work automatically, until the water pressure return normal. It is natural phenomena if water drip from the valve.

Maintenance of the Instant Electric Water Heater
To make sure the normal use for the hot water, please pay attention to maintain:
1.For there are many impurities in the tap water, they may deposit in the strainer when it use for a long
time, it will lead to waterway blockage, affect the normal use of the water heater and damage it, it is
necessary to clean termly.
2.Regularly check the power cord, leakage protection switch are connected well and secured and the
earthing is firm and reliable.
3.Cut off the power supply when you do not use the water heater.
4. Do not spray directly when clean the shell, it should switch off the power supply first and wipe gently by soft and wet cloths, then use the dry cloths. Please keep the shell to be dry and clean.

Parameters

Product parameters
Rated voltage	110V	220-240V
Rated frequency	50Hz/60Hz
Rated power	3500W	3500W
Rated current	30 A	16A
Diameter of cable	3×2.5m㎡	3×1.5m㎡
Switch on water flow	2.0L/MIN(1.5L/MIN)
usage water flow	≥2.0L/MIN
Max.water pressure	0.6MPa
Fit water pressure	0.05-0.6MPa
Protection type	I
Available power		4.5kW / 5.5kW
Product net weight	2KGS
Product dimension	24×14.5×8.5 CM